Shaping Real-Time Systems Engineering of Tomorrow


INCHRON's 15th Anniversary

INCHRON's 15th anniversary is a good opportunity to say a BIG THANK YOU to everyone who contributed to INCHRON's exciting journey so far: Our more than satisfied customers, our strong partners, and our highly committed staff.

Read more

Autonomous Driving: A Real-Time Challenge

For today's advanced driver assistance systems (ADAS), about 50 time critical event chains have to be jointly optimized - all across the system, from sensor to actuator, including embedded control units (ECUs), buses, gateway ECUs, hypervisors, and operating systems - to meet all real-time requirements.

When it comes to fully autonomous driving, well above 1000 time critical event chains have to be jointly optimized. This is not something that could be done manually anymore. This is where the INCHRON Tool-Suite comes in handy, with model-based simulation and trace-based analysis & test.

Visit INCHRON at Embedded World 2018 to see our live demos all about Autonomous Driving: A Real-Time Challenge.

Perfection in Real-Time: A Key Enabler for Autonomous Driving

Autonomous driving is the most disruptive innovation in the automotive sector ever. It is going to fundamentally change the way we travel by car. Major technological challenges, however, have yet to be overcome to enable fully autonomous driving. This is why INCHRON showcases how to master critical real-time aspects of autonomous driving at Embedded World 2018, hall 4, booth 4-300.

At our booth, we will perform various live demos running on embedded hardware. It's all about real-time aspects of autonomous driving, including:

  • Autonomous driving: A real-time challenge
  • Adaptive AUTOSAR real-time analysis
  • Event chain design for R-Car SoC

Learn more about how to achieve perfection in real-time.

Meet INCHRON at Embedded World 2018

INCHRON, the world-wide leading provider of solutions for design, analysis and test of embedded systems and networks, with particular focus on performance and real-time, invites you to learn more about the foundation for autonomous driving at Embedded World 2018. Come and see the INCHRON Tool-Suite in action.

INCHRON is an active member of the AUTOSAR consortium and has a strong footprint and proven track record of success in the automotive industry. Listen to the voices of our automotive customers.

Please contact us to schedule an appointment at INCHRON's booth. Or just come by.

Visit our Embedded World 2018 page and stay tuned for further announcements during the Embedded World opening countdown.

Meet INCHRON at Germany's Largest Congress for Professional Embedded Software Engineering

The Embedded Software Engineering (ESE) Congress 2017 takes place from December 4th to 8th, 2017, in Sindelfingen, Germany. This event is a must for professionals developing embedded systems at the state of the art. It's all about sharing knowledge and latest trends, learning, and networking.

We at INCHRON will be there to showcase our latest solutions, and to present groundbreaking results of our close cooperation with iSYSTEM, Method Park, OpenSynergy, Schaeffler, Renesas and Volkswagen.

Read more

Meet INCHRON at ELIV (Electronics in Vehicles) 2017

Demonstrating How to Master the Dynamic Behavior of Real-Time Systems

Visit us see our demo at OpenSynergy's booth (no. 61) on Oct 18/19, 2017.

Download flyer

Visit ELIV 2017

A.I. Corporation: INCHRON’s New Sales Partner in Japan

A.I. Corporation to Provide INCHRON Solutions, Support, Services, Consulting and Training to Embedded Systems Developers in Japan

Potsdam, July 26th, 2017. INCHRON GmbH, headquartered in Potsdam, Germany, and A.I. Corporation (AIC), based in Tokyo, Japan, announce their sales partnership today. INCHRON is a leading global maker of cutting-edge tools, and a provider of services and consulting for the design, simulation, optimization, and testing of embedded systems and networks. A.I. Corporation, a solutions vendor, provides marketing, development and engineering services, focused on the engineering of software for embedded systems, communications and networks.

Read more

INCHRON at MDS Technology's Automotive SW Developers Conference 2017

MDS Technology, INCHRON's distributor for South Korea, hosted the Automotive SW Developers Conference 2017, a very important event for the Korean automotive industry. More than 1000 engineers enjoyed a day packed with impressive presentations in three parallel tracks, as well as a plethora of exciting products that have been showcased.

Impressions from the event

Meet INCHRON at the Automotive Event "Automobil Elektronik Kongress"

Dr. Ralf Münzenberger, CEO and co-founder of INCHRON, would be very pleased to meet customers and business partners face-to-face during the event on June 27/28, 2017, in Ludwigsburg, Germany.

Please contact us to schedule an appointment.

Advanced driver assistance systems (ADAS) are being considered as intermediate step towards autonomous driving. Since more than 10 years, INCHRON's tier-1 OEM customers successfully rely on our solutions for ADAS design and verification.


INCHRON, iSYSTEM, OpenSynergy and Renesas Electronics Europe Team Up to Demonstrate Efficient Development of Automotive Embedded Systems

Potsdam / Schwabhausen / Berlin / Dusseldorf, March 7, 2017. Automotive embedded systems demand the highest degree of reliability and safety in long-term operation. At the same time, the development of these often very complex systems is also subject to high costs and pressure to meet customer’s delivery deadline. At the Embedded World 2017, the companies INCHRON, iSYSTEM, OpenSynergy and Renesas Elecronics Europe will jointly present a demonstrator for car driver assistance systems that enables the fulfilment of all these requirements through a consistent use of state of the art platforms, software technologies and development tools.

Read more

Developing Self-Driving Cars: Are You Ready to Meet This Challenge?

Discover more about what developers of advanced driver assistance systems and autonomous driving technologies have to expect, and how to prepare yourself for success in this critical endeavour.

Let’s share our thoughts on this exciting topic! We are looking forward to meet customers, business partners, and visitors keen on experiencing the future of embedded systems engineering, at Embedded World 2017, hall 4, booth 4-300.

Meet INCHRON at Embedded World 2017

Embedded World 2017, the leading international fair for embedded systems, starts on March 14, 2017 in Nuremberg, Germany. For everyone interested in latest embedded technologies, this event will be the highlight of the year.

The INCHRON team can hardly wait until the doors of the fair will open, and would be more than happy to share with you the latest advancements in methodologies and tools, as well as groundbreaking thoughts about how to shape embedded systems engineering of tomorrow.

We are looking forward to meet customers, business partners, and visitors keen on experiencing the future of embedded systems engineering, at hall 4, booth 4-300.

Please visit our Embedded World 2017 page, and stay tuned for further announcements during Embedded World opening countdown.

Combining Forces: Optimized Hypervisor Technology

INCHRON and OpenSynergy Announce Cooperation

Berlin, October 17, 2016. OpenSynergy GmbH, headquartered in Berlin, and Potsdam-based INCHRON  GmbH announce their cooperation today. INCHRON is an expert at creating models to simulate the dynamic behavior of embedded systems for real-time and performance optimization. OpenSynergy specializes in embedded automotive software and will use these new models to optimize their hypervisor technology.

Read more

You are here: ABOUT INCHRON » News